About Us

 Home / About Us

Established in 1983, Iran Mineral Products is a private joint stock company active in production of toil and gas wells mineral for drilling muds.

our plant is located some 120 km. east of Tehran close to a town name Garmsar. Based on more than 45 years of experience in production of oil wells muds, we are specifically dedicated to the production of Barite and Bentonite for drilling together with the production if bentonite for foundry sands, and do our best to satisfy the requirements of our customers, complying to the highest standards in this field.

 

Bentonite-OCMA

Use

Production of drilling fluid for soil drilling. Production of drilling fluid for oil- and gaswell drilling For optimal efficiency the mixing water of the slurry should have the following properties: Conductivity : ≤ 1000 μS/cm pH : 4.5 – 9

Description

The basis for Bentonite OCMA is an activated sodium bentonite. Bentonite OCMA complies with the OCMA specifications as laid down for oil drilling and is also KIWA certified.

Advantage

  • Stabilises the borehole
  • Improves the discharge of drilling waste
  • Reduces torsion
  • Easy to recycle
  • Outstanding price - quality ratio
  • Certified according to KIWA-ATA, therefore safe for use in drinking water areas.

Specification

Complies with the specifications for bentonite as drawn up by the “Oil Companies Materials Association DFCP-4. Is supplied with KIWA certificate for Toxicological aspects (ATA), which guarantees a 100 % environmentally-friendly product.

 

 

Parameter

Parameter

Method

Requirement

Typical Value

Yield

OCMA DFCP-4

≥ 22  m3/ton

17.4 m3/ton

API Filtrate water loss

OCMA DFCP-4

≤ 15 ml

13 ml

Dry sieve analysisthrough 150 μm

OCMA DFCP-4

≥ 98 %

99 %

Wet sieve analysis 75 μm

OCMA DFCP-4

≤ 2.5 %

2 %

Moisture content

OCMA DFCP-4

≤ 15.0 %

9.8 %

 

 

SiO2 %

60

Al2O2 %

13

Na2O %

4

K2O %

3.5

CaO %

2

MgO %

3

Fe2O3 %

2.5

L.O.I

10

 

 

 

Chemical and Physical Properties

Composition

High-quality activated sodium bentonite

Colour

Green

Form

Soft powder

 

 

 

 

 

 

 

Slurry Properties

Bentonite OCMA mixes with distilled water in various concentrations.

Parameter

Method

30 kg/m3

40 kg/m3

50 kg/m3

60 kg/m3

Liquid limit ball number

Kugelharfengerät DIN 4126

1

1

2

4

Density

Mud balance

1.02 g/ml

1.03 g/ml

1.03 g/ml

1.04 g/ml

Filtrate water loss

DIN 4127

15.5 ml

13 ml

10 ml

8 ml

Marsh funnel API

API RP 13B 2 (1 litre outflow)

31 s

38.5 s

46 s

54 s

 

 

Packaging

  • 1000 kg packed in 25 kg bags on a pallet with shrink film
  • 1000 kg big bags
  • bulk

 

 

Bentonite-A.P.I

Use

For the production of drilling fluid for use in oil- and gas well drilling. For optimal efficiency the mixing water of the slurry should have the following properties:

 

    Conductivity:   ≤ 1000 μS/cm

    pH:   4.5 – 9

 

 

Description

The basis for CEBOGEL API is a high-quality sodium bentonite from a reliable source. Its characteristic is the low YP/PV ratio.

 

 

 

 

Typical Values

Parameter

Method

Required

Typical Value

600 Reading at 64 gram

API 13A-section 9

30 min.

38

Yield Point/plastic viscosity ratio

API 13A-section 9

3 max.

2.6

Wet sieve analysis

API 13A-section 9

4 % max.

3 %

Filtrate volume

API 13A-section 9

15 ml max.

14 ml

 

 

Packaging

 1000 kg packed in 25 kg bags on a pallet with shrink film

1000 kg Big Bags

 bulk

Foundy Bentonite

This product complies with the most advanced standards of foundry practice.

The swelling Index of this Bentonite is at least 30 and its green Tensile Strength is measured to be minimum 18.5 while the green compressive strength is more than 850 and PH stand at min 9-10.

this Bentonite is being supplied in:

1000 kg Big Bags

 1000 kg Packs in 25 kg bags

 Bulk